
HP Spectre 13 Disassembly by Expert
In this article, we will discuss HP Spectre 13 Disassembly by Expert step by step. Far from beating about the bush, let’s come straight to the point. Let us discuss first the features of this particular laptop HP Spectre 13 in greater detail.
- 13.3-inch, 1920 x 1080 pixel display (300-nit, IPS display with 72% colour gamut).
- Intel i5-6200U/i7-6500U Skylake processor, 8GB of RAM, and 256GB of PCIe SSD, three USB Type-C port, and a backlit keyboard.
- The thickness of 10.4mm ( 0.41 inches).
- Weighs 2.45 pounds.
- The battery sustains for 9.5 hours.
The laptop also has three USB Type-C ports on the back. You can charge the HP Spectre by connecting the power adapter to any of these ports, and you can also connect a display adapter to any of them. Two of the ports also support Thunderbolt 3 for higher-speed data transfers.
- On the bottom of the laptop, there are three-foot grips supporting the notebook, but also to facilitate ventilation.
- HP Spectre 13’s battery is very thin, 7.7V, 38Wh, the battery life of more than 9 hours, in the video mode, the battery life of more than 5 hours.
- The laptop comes with four B&O speaker modules.
- HP Spectre 13 is powered by Intel i5-6200U/i7-6500U processor, rather than Intel Core m processor, the Core i5-6200U processor at 2.3GHz, with 14nm technology, thermal power is 15W, integrated HD 520 graphics core.
The teardown procedure needs a good amount of caution. This process is as follows:
Tools needed: screwdriver, plastic crowbar, and pickStep 1: Firstly, we need to remove the three non-slip strips as there are no screws on the bottom cover. Under the foot grip, you can find five screws that securing the bottom cover to the ultrabook
Step 2:
Next, you are supposed to remove all screws, and you can remove the bottom cover easily. Now you can get access to the internal components, including the battery, SSD, Wi-Fi module, cooling fan, and motherboard.
Step 3:
Remove all screws securing the battery and disconnect the battery connector. You can remove the battery.
Under the battery, you can access the touchpad and keyboard.Step 4:
Remove Speaker by disconnecting the cables
Step 5:
Then Remove one screw securing the SSD and take it out of its slot.
Step 6:
Remove screw and disconnect the cable from the motherboard. Disconnect two wireless antenna cables.
Step 7: Undock motherboard
Disconnect all cables from the motherboard. Remove all screws securing the motherboard.
Step 7: Remove Keyboard and Touchpad
Once the motherboard undocks after that you can remove the keyboard and touchpad.
Step 7: Remove Keyboard and Touchpad
Once the motherboard undocks after that you can remove the keyboard and touchpad.
Step 7: we are done
you can remove heatsink fan by removing 3 screws there. This is the step by step process of Disassembly off HP Spectre 13.
If You Face any kind HArdware related issue with your Hp Device You Can click her.
For more, You can check our blog for more Repair Guide.
In Case Your Facing Issue You consult with an expert here. Or in case of any mac or HP Laptop issue you get intocuh with us or Call Us +91-9088888835
Hope after reading this article you are able to successfully Disassemble and HP Spectre 13 Teardown or similar HP Laptop.
Also, check our Windows Error Problem Related Fix here.
Want to Learn More Cool Tips and Tricks Click here.
Check Our Youtube Channel For More Tutorial and Repair Video.
Have You Ever Heard about GOD MODE in Windows? Learn More
Stay Tune Until Next adios!