
If your Laptop USB Port not working properly it means that it signifies that your USB ports have gone on strike for no apparent reason. If you do not know how to repair your laptop’s USB port on your own. Then there’s no need to be concerned. Because this article is solely for you. This article will teach you about the most common causes of laptop USB port damage, as well as how to repair them yourself. So, let’s dive into the main topic.
Get Laptop USB Port Repair
Reasons Behind Your Laptop USB Port Is Not Working
There are several reasons that your Laptop’s USB Port not working as it used to be. Some of the reasons are:
1. Previously Connected Device
Some of the reasons for the USB port not working properly is to have to do with the device that was previously attached to the port. According to Microsoft, USB ports may stop working when you attach a malfunctioning item to the computer, even after you unplug it. Close the computer and restart it to fix the problem. Another issue is that often connecting and disconnecting an item can cause the USB port to malfunction. Reconnecting the device and checking for hardware changes, rebooting the system, or resetting the USB controller may resolve this issue and restore functionality to the ports.
2. Software Configuration
Invalid software and operating system settings are also common causes of USB port not working. If you have added a new port or device, installed a new operating system, or made other significant modifications to the computer, the problem could be caused by these settings. Changes to the Control Panel, Device Manager, or the main setup application may be required. It’s also possible that the USB port, device, or controller still needs drivers. Additionally, the computer could be infected with a virus that prevents particular accessories or ports from working properly.
3. Hardware Problems
Although software and accessory difficulties are more likely to cause computer issues than genuine hardware failure, they cannot be ruled out. If the computer has a USB card in one of the expansion slots, the card may have become loose or the slot may have failed. A wire connecting the USB port to the motherboard could be broken. Damage to the ports or a failed USB controller is two more possible hardware culprits. It’s also conceivable that the ports are just dirty.
4. Other Problems
If you use the wrong type of USB extension cable, the ports may stop working. According to Microsoft, this occurs when a high-speed item is used with a low-speed USB cable. Because certain older operating systems do not support USB, the ports will only provide power to an accessory. Refer to the computer, accessory, and any add-on USB hardware instruction manuals for more possible causes.
How To Fix Laptop USB Port Not Working
If your Laptop USB is not working then there are several ways that you can able to fix your Laptop USB port. Some of the ways are given in below:
1. Restart your laptop.

An unrecognized USB device can sometimes be fixed with a simple reboot. Remove your USB device, wait a few minutes, and then restart your computer. Reconnect your USB gadget to test whether it still works. Fortunately, it will completely cure your problem, and you will no longer have to worry about it. Otherwise, you’ll have to continue on to the following step.
2. Adjust Power Management
Windows turns off your USB controllers when they’re not in use to save power, then turns them back on when they’re needed. Unfortunately, Windows does not always switch your USB controllers back. You’ll need to alter its Power Management to rule this out as the cause by following the procedures below:

1) To open the Run box, press the Windows logo key and R at the same time on your keyboard. Then, in the box, type devmgmt.msc and click OK.

2) Double-click Universal Serial Bus controllers in the Device Manager window to expand the drop-down list.

3) Select Properties from the right-click menu of the USB Root Hub device in the list.

4) Navigate to the Power Management section. Then click OK after unchecking the Allow the computer to turn off this device to save power option.

5) Repeat steps 3–4 for each USB Root Hub device on your list of USB controllers. Check if your USB ports work again after following the procedures above. Congratulations if it works properly! If not, move on to the next step.
3. Reinstall USB drivers
You can also use Device Manager to uninstall all USB devices from your machine. After restarting Windows, the USB drivers will be automatically reinstalled.

1) To open the Run box, press the Windows logo key and R at the same time on your keyboard. Then, in the box, type devmgmt.msc and click OK.

2) To enlarge the drop-down list, double-click Universal Serial Bus controllers.

3) Select Uninstall device from the right-click menu of the USB Root Hub device in the list.

4) Repeat steps 3–4 for each USB Root Hub device on your list of USB controllers.
5) Restart your computer for the changes to take effect. Check to see whether the USB ports are working again.
Also, Read
4. Update USB drivers
If the methods above don’t work, you’re probably using an old or incorrect USB driver. You need to update your USB drivers.

1) To open the Run box, press the Windows logo key and R at the same time on your keyboard. Then, in the box, type devmgmt.msc and click OK.

2) Double-click Universal Serial Bus controllers to expand the drop-down list.

3) To find USB 3.0, expand the categories. Other devices or “Universal Serial Bus Controllers” are where you’ll find it and then choose the Update Driver Software.

5) To look for updated drivers, choose Automatic search. If it is detected, Windows will automatically install it.
5. Disable USB Selective Suspend
If the USB port not working persists, try turning off USB Selective Suspend. By putting a specific USB port(s) in a low-power state, USB Selective Suspend protects your computer from using too much needless power. Disabling this function may assist you in resolving your USB issues.

1) In the search box, type choose a power plan and then click Choose a power plan.

2) Next to the plan choice you’re using currently, click Change plan settings.

3) Select Change advanced power settings from the menu.

4) Select USB options, then select USB selective suspend.

5) Select Disabled from the drop-down box after clicking On battery. To save the changes, click Apply and OK.
6. Remove your laptop battery

If your laptop’s USB port not working still, you might be able to solve the problem by removing the laptop battery. Many People said that removing the battery and pressing the power button for 30 seconds or more fixed the problem. You’ll completely discharge your capacitors if you do this. Some users also suggest leaving your laptop switched off overnight without a battery to allow capacitors to fully drain. The problem with the USB should be totally resolved after the issue which you are facing should be solved.
Get Laptop USB Port Repair
Conclusion:
We hope that by reading this post, you will be able to resolve your USB problems on your laptop. If none of the following solutions work, it’s likely that your computer’s USB ports have been damaged. Then you should go to your local laptop store. However, if you are unable to locate one, Techyuga is the place to go for an economical Laptop USB port repair service. But if you have any other Laptop issues like laptop screen replacement, laptop battery replacement, laptop hinge repair, and more then you can also visit Techyuga. Have you ever had a problem with a USB port? How did you get it fixed? Please share your thoughts in the comments box below!