Error, How to's, Windows, Windows 10

ntoskrnl.exe BSOD Blue Screen error [Solved]

ntoskrnl.exe BSOD Blue Screen error

How to Fix ntoskrnl.exe BSOD Blue Screen error.

Are You Facing ntoskrnl.exe BSOD Blue Screen error It’s known as the blue screen of death? The error message shows that you’ve got a problem caused by ntoskrnl.exe. But there is no need to worry; this error is common to many Windows 7 users. With the help of a few easy steps, you can fix it immediately.

Here are the fixes for ‘ntoskrnl.exe’.
There are 3 solutions to try for this. Just work your way down the list until you find the solution that works for you.

  • Update device drivers
  • Reset overclocking settings
  • Perform a memtest

What is ntoskrnl.exe?
Ntoskrnl.exe is the kernel of the operating system. If the file is at fault, your Window OS simply won’t work and the computer is very likely to show a frequent blue screen of deaths incidents along with few other technical issues.

1: Update device drivers
One of the common causes of the blue screen of death errors is out-dated or faulty drivers. So whenever you get one, always verify that all your devices have the right drive and updated to its latest version. There are two ways you can get the right drivers for your video card and monitor: manually or automatically.
Manual driver update – You can update your device drivers manually by going to the manufacturer’s website for your hardware devices and search for the most recent correct driver for each. Only choose drivers that are compatible with your version of Windows 10.

2: Reset overclocking settings

ntoskrnl.exe BSOD Blue Screen error

Overlocking drivers is the other main reason for this blue screen of death error. If you have a trusted program to help you change the overclock in BIOS, use it.
If not, follow the instructions below to help you clear the CMOS from within the BIOS menu and reset your BIOS settings back to their factory default state.
Note: The following instructions are for Windows 7. The procedure is different if you’re on Windows 8, 8.1 or 10 operating systems.
1) Press and hold the power button for about 10 seconds, or until your system completely shut down.

2) Power on the system. As soon as the first logo screen appears, immediately press F1, F2, F10, ESC or Delete for desktops to enter the BIOS
NOTE: Sometimes instead of these keys, you’ll need to press combinations, such as CTRL+ ALT+ ESC or CTRL+ALT+DEL if you’re using an old machine. The keys to press differ between computers depending on the manufacturer and model. Try to read what comes up on the initial load screen, as it will usually tell you the right key to press.

3) Use your arrow keys to go to Exit and then move down to Load Setup Defaults. (Your computer might be different, but you should be able to see the option Load Setup Default.)

4) Then press the Enter key. You might be able to see a notification like the one below. Use the arrow key to select Yes and then press Enter again.

5) Exit Saving Changes should be highlighted now. Press Enter and then press Enter again to save configuration change.

Again, the information showing on your computer may be different from ours, and you should change the settings according to the prompts on your screen. If you’re not sure how to complete a step, please go to the official support page for your computer’s manufacturer and ask for help. Or you can ask a question in the comments section below, and we’ll do our best to help.

 

3: Perform a memtest

ntoskrnl.exe BSOD Blue Screen error

The ntoskrnl. exe BSOD is usually related to memory and is possibly caused by a faulty driver. We suggested that you run the following memory test to check your computer’s memory and find out which driver is causing the problem.
Note: If you’re over-clocking any apps or programs, please shut them down first before you run the tests. You will need to reboot your computer to perform the test. During the test, you won’t be able to use your computer.
1) On your keyboard, click the Start button, then type Windows Memory Diagnostic and press Enter.

2) Click Restart now and check for problems(recommended). Be sure to save your work first because your computer will restart immediately.

3) Your computer will restart and the Windows Memory Diagnostic Tool screen will appear.

The test takes some time to finish and that’s normal. You’ll see the test results after you log on.
Hence with the above-mentioned steps, you will be able to get rid of any Blue Screen Error.

Hope Your Methods were helpful enough to solve your ntoskrnl.exe BSOD Blue Screen error on Windows 10.

Also, check our article  How to Stop Windows 10 From Using So Much Data

and Our Windows Error Problem Related Fix here.

Want to Learn More Cool Tips and Tricks Click here. Or Check Our YouTube

Have You Ever Heard about GOD MODE in Windows?  Learn More

Stay Tune Until Next adios!

Related Posts

Leave a Reply

Your email address will not be published. Required fields are marked *